AIM PS5 Remapping Paddles

 

  1. Plug the USB cable into the controller while plugged into your PS5 or PC.
  2. Press and hold both (left and right) bottom paddles at the same time for 5 seconds. This enables remapping mode.
  3. Next, press the paddle then the button you would like it to correspond to and hold for 2 seconds. (Example: press the bottom left paddle then ‘X’ and hold for 2 seconds.) Do this for each button you would like remapped to a paddle.
  4. Once you done remapping press and hold both (left and right ) bottom paddles at the same time for 5 seconds to exit remap mode.
  5. Each button of the PS5 controller is able to be mapped to a paddle EXCEPT L2 & R2.
    *Note there is no light or indication you are in remapping mode*

AIM PS4 Remapping Paddles:

  1. Plug in USB cable into controller.
  2. Press and hold the Touchpad button for 5 seconds. After 5 seconds, the PS4 LED will begin to slowly blink – You may release the  Touchpad button.
  3. Press any of the PS4 controller buttons you want to re-map The LED will blink indicating the button press was registered.
  4. Press any of the AIM PADDLES. LED will blink again indicating the re-mapping was successful.
  5. If you want to continue re-mapping more buttons, go back to step 3; otherwise go to step 6.
  6. Once you are done re-mapping, press the Touchpad button. The slow blink will stop.
  7. You can remap up to 12 buttons: X, Circle, Triangle, Square, Up (U),Down (D),Left (L),Right (R),L1,R1,Left Joy Stick Push Button (LJ),Right Joy Stick Push Button (RJ)